Abdullah Atalar recent Papers
M. Ghasemzadeh, A. Atalar, “A Novel 10-GHz CMOS Carry Generator Circuit for High-Speed Adders”, International Journal of Circuit Theory and Applications, (2025) doi: 10.1002/cta.70118
E. Aras, E. Urfalı, B. Bütun, E. Özbay, A. Atalar, “HEMTs with Side-Source-Via for Optimizing the Performance and Size of High-Power Amplifiers” IEEE Microwave and Wireless Component Letters , vol. 35, no. 7, pp. 1061-1064 (2025) doi: 10.1109/LMWT.2025.3555672.
Ç. Ballı, A. Değirmenci, A. Aktuğ, A. Atalar, “Wideband Distributed Choke Inductor for Distributed Power Amplifiers ” IEEE Microwave and Wireless Component Letters , vol. 33, no.5, pp. 539-542 (2023) doi: 10.1109/LMWT.2022.3233061.
S. Alemdar, A. Atalar, “Doherty Power Amplifier Output Networks with Maximized Bandwidth “, International Journal of Microwave and Wireless Technologies, 1-17. doi:10.1017/S1759078722000381 (2022)
M. Acar, A. Atalar, M. Yilmaz, H. Koymen, “Mechanically coupled clamped circular plate resonators: modeling, design and experimental verification “, J. of Micromechanics and Microengineering, vol. 31, no. 10, 105002 (2021)
B. Sutbas, E. Ozbay, A. Atalar, “Accurate isolation networks in quadrature couplers and power dividers “, IEEE Trans. on Circuits and Systems II: Express Brief s, vol. 68, no. 4,pp. 1148-1152 (2021) (https://doi.org/10.1109/TCSII.2020.3035667)
T.M. Khan, A.S. Tasdelen, M. Yilmaz, A. Atalar, H. Koymen, “High-intensity airborne CMUT transmitter array with beam steering ” IEEE Journal of Electromechanical Systems , vol. 29, no. 6,pp. 1537-1546, (2020) (https://dx.doi.org/10.1109/JMEMS.2020.3026094).
B. Sutbas, E. Ozbay, A. Atalar, “Accurate and Process Tolerans Resistive Load ” IEEE Trans. on Microwave Theory and Techniques, vol. 68, no. 7, pp. 2495-2500, July 2020, doi: 10.1109/TMTT.2020.2986207.(2020)
M. Khan, T.M. Khan, A.S. Tasdelen, M. Yilmaz, A. Atalar, H. Koymen, “Optimization of a collapsed mode CMUT receiver for maximum off-resonance sensitivity ” IEEE Journal of Microelectromechanical Systems, vol. 27, pp. 921-930 (2018) (doi: 10.1109/JMEMS.2018.2857444)
A. Coskun, A. Atalar, “Noise figure of a balanced amplifier ” IEEE Transactions on Circuits and Systems II: Express Briefs , vol. 65, pp. 1129-1133 (2018) (doi: 10.1109/TCSII.2018.2801759)
H. Koymen, A. Atalar, S. Guler, I. Koymen, A. Tasdelen, A. Unlugedik, “Unbiased charged circular CMUT microphone: Lumped element modelling and performance “, IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control, vol. 65, pp. 60-71 (2017) (doi: 10.1109/TUFFC.2017.2773490)
A. Coskun, A. Atalar, “Noise Figure Degradation in Balanced Amplifiers “, IEEE Microwave and Wireless Components Letters , vol. 27, pp. 848–850 (2017)
C. Kelleci, A. Atalar, “An Analytical Approach to the Design of Multiple Mode Rectangular Cavity Waveguide Filters “, IEEE Trans. on Microwave Theory and Techniques, vol. 65, pp. 2857-2865 (2017)
H. Koymen, A. Atalar, A. Tasdelen, “Bilateral CMUT Cells and Arrays: Equivalent Circuits, Diffraction Constants and Substrate Impedance “, IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control vol. 64, pp. 414-423 (2017)
A. Ozgurluk, H.K. Oguz, A. Atalar, H. Koymen, “Mutual Radiation Impedance of Uncollapsed CMUT Cells with Different Radii “, arXiv:1512.05543v1 (2015)
V. Tas, A. Atalar, “An optimized isolation network for the Wilkinson divider ”, IEEE Trans. on Microwave Theory and Techniques vol. 62, pp. 3393-3402 (2014)
A. Atalar, H. Koymen, K. Oguz, “Rayleigh-Bloch waves in CMUT arrays ”, IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 61, pp. 2139-2148 (2014)
A. Unlugedik, A. Taşdelen, A. Atalar, H. Köymen, “Designing Transmitting CMUT cells for airborne applications ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 61, pp. 1899-1910 (2014)
E. Aydoğdu, A. Özgürlük, A. Atalar, H. Köymen, “Parametric Nonlinear Lumped Element Model for Circular CMUTs in Collapsed Mode ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 61, pp. 173-181 (2014)
V. Tas, A. Atalar, “Using phase relations in microstrip directional couplers to achieve high directivity “, IEEE Trans. on Microwave Theory and Techniques vol. 61, pp. 4063-4071 (2013)
K. Oğuz, A. Atalar, H. Köymen, “Equivalent Circuit-Based Analysis of CMUT Cell Dynamics ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 60, pp. 1016-1024 (2013)
Oğuzhan Atak, A. Atalar “BilRC: An Execution Triggered Coarse Grained Reconfigurable Architecture “, IEEE Transactions on Very Large Scale Integration Systems vol. 21, pp. 1285-1298 (2013)
H. Köymen, A. Atalar, E. Aydoğdu, C. Kocabaş, H. K. Oğuz, S. Olçum, A. Ozgurluk, and A. Ünlügedik, “An Improved Lumped Element Nonlinear Circuit Model for a Circular CMUT Cell ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control vol. 59 , pp. 1791-1799 (2012)
A. Özgürlük, A. Atalar, H. Köymen, S. Olçum, “Radiation Impedance of Collapsed Micromachined Capacitive Ultrasonic Transducers ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 59 , pp. 1301-1308 (2012)
Y. Yamaner, S. Olçum, K. Oğuz, H. Köymen, A. Bozkurt, A. Atalar, “High power CMUTs: Modelling and Experimental Verification ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 59 , pp. 1276-1284 (2012)
S. Olcum, Y. Yamaner, A. Bozkurt, H. Koymen, A. Atalar, “An Equivalent Circuit Model for Transmitting Capacitive Micromachined Ultrasonic Transducers in Collapse Mode ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control vol. 58 , pp. 1468-1477 (2011)
S.Olcum, Y.Yamaner, A.Bozkurt, A.Atalar, “Deep-collapse operation of capacitive micromachined ultrasonic transducers ” Ultrasonic Transducers in Collapse Mode” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control vol. 58 , pp. 2475 – 2483 (2011)
M.D. Aksoy, A. Atalar, “Force spectroscopy using bimodal frequency modulation atomic force microscopy ” Phys. Review B , vol. 83 , 075416 (2011)
M.N. Senlik, S. Olcum, H. Koymen, A. Atalar, “Radiation impedance of an array of capacitive micromachined ultrasonic transducers” IEEE Trans. onUltrasonics, Ferroelectrics and Frequency Control , vol. 57 , pp. 969-975 (2010)
H. Oguz, S. Olcum, M. Senlik, V. Tas, A. Atalar, H, Koymen, “Nonlinear modelling of an immersed transmitting capacitive micromachined ultrasonic transducer for harmonic balance analysis ” IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control , vol. 57 , pp. 438-447 (2010)