Professor of Electrical and Electronics Engineering
Abdullah Atalar earlier papers
A.Atalar,C.F.Quate, and H.K.Wickramasinghe, “Phase imaging with the acoustic microscope,” Appl. Phys. Lett. 31, pp. 791-793 (1977).
A.Atalar, “An angular spectrum approach to contrast in re ection acoustic microscopy,” J. Appl. Phys. 49, pp. 5130-5139 (1978).
C.F.Quate, A.Atalar, and H.K.Wickramasinghe, “Acoustic microscopy with mechanical scanning – A review,” Proc. of the IEEE 67, pp. 1092-1114 (1979).
A.Atalar, V.Jipson, R.Koch, and C.F.Quate, “Acoustic microscopy with microwave frequencies,” Ann. Rev. of Mater. Sci. 9, pp. 255-281 (1979).
R.N.Johnston, A.Atalar, J.Heiserman, V. Jipson, and C.F.Quate, “Acoustic microscopy: Resolution of subcellular detail,” Proc. Natl. Acad. Sci. 76, pp. 3325-3329 (1979)ç
A.Atalar, Reflection coefficient for a lossy liquid-lossless isotropic solid interface,” J. Acoust. Soc. Am. 65, pp. 1101-1104 (1979).
A.Atalar, “Modulation transfer function for the acoustic microscope,” Elec. Lett. 15, pp. 321-323 (1979).
A.Atalar, “A physical model for the acoustic signatures,” J. Appl. Phys. 50, pp. 8237-8239 (1979).
A.Atalar, “A backscattering formula for acoustic transducers,” J. Appl. Phys. 51, pp. 3093-3098 (1980).
A.Atalar, “Photoacoustic effect as a liquid absorbance detector,” Appl. Opt. 19, pp. 3204-3210 (1980).
A.Atalar, “On the reflection coefficient which exceeds unity,” J. Acoust. Soc. Am. 70, pp. 1182-1183 (1981).
A.Atalar, “Reflection of ultrasonic waves at a liquid-cubic-solid interface,” J. Acoust. Soc. Am. 73, (1983) pp. 435-440.
M.Hoppe, A.Atalar, W.J. Patzelt and A.Thaer, “Leitz-Akustomikroskop ELSAM, Anwendungen in der Materialuntersuchung|erste Ergebnisse,” Leitz-Mitt. Wiss. u. Techn. VIII, 5, pp. 125-131 (1983) (in German).
A.Atalar, “Penetration Depth of the Acoustic Microscope,” IEEE Trans. Son. Ultrason. 32, pp. 164-166 (1985).
H.Koymen and A.Atalar “Focusing Surface Waves using an axicon,” Appl. Phys. Lett. 47, pp. 1266-1268 (1985).
A.Atalar and M.Hoppe, “A High Performance Acoustic Microscope,” Rev. Sci. Inst. 57, pp. 2568-2576 (1986).
A.Atalar and H.Koymen, “Use of a conical axicon as a surface acoustic wave focusing device,” IEEE Trans. Son. Ultrason. 34, pp. 53-63 (1987).
A.Atalar, “A fast method of calculating diffraction loss between two facing transducers,” IEEE Trans. Son. Ultrason., 35, pp. 612-614 (1988).
A. Buyukgebiz, M. Çoruh, A. Atalar, F. Çoruh, “Üniversite Gençliğinin sigara içme alışkanlığı, sigara içimi ile ilgili tutum ve inançlar,” Çocuk Sağlığı ve Hastalıkları Dergisi 31, pp. 235-242 (1988) (in Turkish).
O. Arkan, E. Teletar, A. Atalar, “Reflection coefficient null of acoustic waves at a liquid-anisotropic-solid interface,” J. Acoust. Soc. Am., 85, pp. 1-10 (1989).
A. Atalar, “Improvement of Anisotropy Sensitivity in the Scanning Acoustic Microscope,” IEEE Trans. on Ultrason. Ferro. and Freq. Cont., 36, pp. 264-273 (1989).
N. Gunalp, A. Atalar “Response of acoustic imaging systems using convergent leaky waves to cylindrical flaws,” IEEE Trans. on Ultrason. Ferro. and Freq. Cont. 36, pp. 507-516(1989).
M. Karaman, L. Onural, and A. Atalar, “Design and Implementation of a General Purpose Median Filter Unit in CMOS VLSI,” IEEE Trans. Sol. Sta. Cir. 25, (1990) pp. 505-513.
A. Atalar, H. Koymen, and L. Degertekin, “A Lamb wave lens for acoustic microscopy,” IEEE Trans. on Ultrason. Ferro. and Freq. Cont. 39, pp. 661-667 (1992).
M. Karaman, A. Atalar, H. Koymen, M. O’Donnell, “A phase aberration correction method for ultrasound imaging,” IEEE Trans. on Ultrason. Ferro. and Freq. Cont. 40, pp. 275-282 (1993).
M. Karaman, A. Atalar, H. Koymen, “VLSI Circuits for Adaptive Digital Beamforming in Ultrasound Imaging,” IEEE Trans. on Medical Imaging, vol.12, no.4, pp.711-720 (1993).
L. Onural, G. Bozdag, and A. Atalar, “A new high-resolution display device for holographic 3-D video: principles and simulations,” Opt. Eng. 33, pp. 835-844 (1994).
M.Karaman, H.Koymen, A.Atalar, and M.O’Donnell, “Influence of missing array elements on phase aberration correction for medical ultrasound” IEEE Trans. Ultrason. Ferroelectrics, and Freq. Cont., 41, pp. 613-620 (1994).
S. Topcu, O. Ocal, A. Atalar, M. A. Tan, “A novel algorithm for DC analysis of piecewise-linear circuits: POPCORN,” IEEE Trans. Circuits Syst.-I 41, pp. 553-556, (1994).
M. Celik, O. Ocalı, M.A. Tan, A. Atalar, “Pole-zero computation in High Frequency Circuits using Multipoint Pade Approximation,” IEEE Trans. Circuits and Systems I: Fund. Theory and Appl. 42, pp. 6-13, (1995).
M. Celik, A. Atalar, M.A. Tan, “Transient Analysis of Nonlinear Circuits by Combining Asymptotic Waveform Evaluation with Volterra Series,” IEEE Trans. Circuits and Systems I: Fund. Theory and Appl. 42, pp. 470-473, (1995).
O. Ocali, M. A. Tan, A. Atalar, “A new method for nonlinear circuit simulation in time domain: NOWE,” IEEE Trans. on Computer Aided Design, 15, pp. 368-374, (1996).
M. Celik, A. Atalar, M.A. Tan, “A New Method for the Steady-State Analysis of Periodically Excited Nonlinear Circuits,” IEEE Trans. Circuits and Systems 43, pp. 964-972 (1996).
S.C. Minne, S.R. Manalis, A. Atalar, C.F. Quate, “Contact imaging in the atomic force microscope using higher order exural mode combined with a new sensor,” Appl. Phys. Lett., 68, p. 1427, (1996).
S. R. Manalis, S. C. Minne, A. Atalar, and C. F. Quate, “High Speed Atomic Force Microscopy using an Integrated Actuator and Optical Lever Detection,” Rev. Sci. Inst., 67, pp. 3294-3297 (1996).
S. C. Minne, S. R. Manalis, A. Atalar, and C. F. Quate, “Independent Parallel Lithography using the Atomic Force Microscope,” J. of Vacuum Science and Technology B., 14, pp. 2456-2461 (1996).
H.T. Soh, I. Ladabaum, A. Atalar, C.F. Quate and B.T. Khuri-Yakub, “Silicon micromachined ultrasonic immersion transducers,” Appl. Phys. Lett., 69, pp. 3674-3676, (1996).
S.R. Manalis, S.C. Minne, A. Atalar and C.F. Quate, “Interdigital cantilevers for atomic force microscopy”, Appl. Phys. Lett., 69 pp. 3944-3946, (1996).
S.R. Manalis, S.C. Minne, C.F. Quate, G.G. Yaralioglu, A. Atalar, “Two dimensional micromechanical bimorph arrays for detection of thermal radiation”, Appl. Phys. Lett., 70 pp. 3311-3313, (1997).
M. Sungur, A.S. Ekinci and A. Atalar, “An efficient program for analysis of interconnect circuits,” Int. J. of Electronics, 82, pp. 641-654 (1997).
S. Topcu, A. Atalar, M.A. Tan, “Application of asymptotic waveform evaluation for time domain analysis of nonlinear circuits”, Int. J. of Electronics, 83, pp. 351-361, (1997).
K. Wilder, H.T. Soh, A. Atalar, C.F. Quate, “Hybrid atomic force/scanning tunneling lithography”, J. Vac. Sci. Tech. B 15, pp. 1811-1817 (1997).
I. Ladabaum, X.C. Jin, H.T. Soh, A. Atalar, B.T. Khuri-Yakub, “Surface micromachined capacitive ultrasonic transducers”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 45, pp. 678-690 (1998).
G. Percin, A. Atalar, F. L. Degertekin, and B. T. Khuri-Yakub, “Micromachined two dimensional array piezoelectrically actuated transducers,” Appl. Phys. Lett., 72, pp. 1397-1399, (1998).
G.G. Yaralioglu, S .R. Manalis, A. Atalar, C.F. Quate, “Analysis and design of an interdigital cantilever as a displacement sensor,” J. Appl.Phys., 83, pp. 7405-7415 (1998).
S. C. Minne, G. Yaralioglu, S. R. Manalis, J. Zesch, A. Atalar, C. F. Quate, “Automated Parallel High Speed Atomic Force Microscopy,” Appl. Phys. Lett., 72, pp. 2340-2342 (1998).
A. S. Ergun, A. Atalar, B. Temelkuran, E. Ozbay, “A sensitive detection method for capacitive ultrasonic transducers”, Appl. Phys. Lett., 72, pp. 2957-2959 (1998).
L. Degertekin, A. Atalar, B.T. Khuri-Yakub, “Micromachinable ultrasonic leaky wave air transducers”, Appl. Phys. Lett., 73, pp. 741-743 (1998)
S.C. Minne, J.D. Adams, G.G. Yaralioglu, S.R. Manalis, A. Atalar, C.F. Quate, “Centimeter scale atomic force microscope imaging and lithography”, Appl. Phys. Lett., 73, pp. 1742-1744 (1998).
J. D. Adams, S. C. Minne, S. R. Manalis, K. Wilder, G. Yaralioglu, A. Atalar, D. Adderton, and C. F. Quate, “High Throughput, High Resolution Scanning Probe Microscopy,” Future Fab International, Issue 6, pp. 259-263 (1998).
A.S. Ekinci, A. Atalar, “An electrical circuit theoretical method for time- and frequency- domain solutions of the structural mechanical problems” International Journal for Numerical Methods in Engineering, 45, pp. 1485-1507 (1999).
A. Bozkurt, I. Ladabaum, A. Atalar, B.T. KhuriYakub, “Theory and analysis of electrode size optimization for capacitive microfabricated ultrasonic transducers” IEEE Trans on Ultrasonics Ferroelectrics and Frequency Control, 46, pp. 1364-1374 (1999).
G.G. Yaralioglu, A. Atalar, “Noise analysis of geometrically complex mechanical structures using analogy between electrical circuits and mechanical systems”, Review of Scientic Instruments , 70, pp. 2379-2383 (1999).
T. Sulchek, S.C. Minne, J.D. Adams, D.A. Fletcher, A. Atalar, C.F. Quate, D.M. Adderton, “Dual integrated actuators for extended range high speed atomic force microscopy”, Applied Physics Letters, 75, pp. 1637-1639 (1999).
K. Wilder, H.T. Soh, A. Atalar, C.F. Quate, “Nanometer-scale patterning and individual current-controlled lithography using multiple scanning probes”, Review of Scientic Instruments , 70, pp. 2822_2827 (1999).
E.M. Chow, H.T. Soh, H.C. Lee, J.D. Adams, S.C. Minne, G. Yaralioglu, A. Atalar, C.F. Quate, T.W. Kenny, “Integration of through-wafer interconnects with a two-dimensional cantilever array”, Sensors and Actuators A-Physical, 83, pp. 118-123 (2000)
T. Sulchek, R. Hsieh, J.D. Adams, G.G. Yaralioglu, S.C. Minne, C.F. Quate, J.P. Cleveland, A. Atalar, D.M. Adderton, “High-speed tapping mode imaging with active Q control for atomic force microscopy”, Applied Physics Letters, 76, pp. 1473-1475 (2000)
T. Sulchek, R.J. Grow, G.G. Yaraloglu, S.C. Minne, C.F. Quate, S.R. Manalis, A. Kiraz, A. Aydiner, and A. Atalar, “Parallel atomic force microscopy with optical interferometric detection”, Applied Physics Letters, 78, pp. 1787-1789 (2001)
O. Sahin, A. Atalar, “Analysis of tip-sample interaction in tapping-mode atomic force microscope using an electrical circuit simulator”, Applied Physics Letters, 78, pp. 2973 (2001).
A. S. Ergun, B. Temelkuran, E. Ozbay, A. Atalar, “A new detection method for capacitive micromachined ultrasonic transducers”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 48, pp.932-942 (2001)
O. Sahin, A. Atalar, “Simulation of higher harmonics generation in tapping-mode atomic force microscopy” Applied Physics Letters 79, pp. 4455-4457 (2001)
M. Balantekin, A. Atalar, “Simulations of Switching Vibrating Cantilever in Atomic Force Microscopy” Applied Surface Science, 205, pp. 86-96 (2003).
S. E. Kocabas, A. Atalar, “Binary Sequences with Low Aperiodic Autocorrelation for Synchronization Purposes” IEEE Communications Letters, 7, pp. 36-38,(2003)
M. Balantekin, A. Atalar, “Power dissipation analysis in tapping mode atomic force microscopy”, Physical Review B, Vol. 67, 193404 (2003).
O. Sahin, C.F. Quate, O. Solgaard, A. Atalar, “Resonant harmonic response in tapping-mode atomic force microscopy”, Physical Review B, Vol. 69, 165416 (2004)
G. Ertas, U. K. Demirok, A. Atalar, S. Suzer “X-ray photoelectron spectroscopy for resistance-capacitance measurements of surface structures” Appl. Phys. Lett., vol.86, 183110 (2005)
S. Olcum, M.N. Senlik, A. Atalar, “Optimization of the Gain-Bandwidth Product of capacitive Micromachined Ultrasonic Transducers”, IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control, vol. 52, pp. 2211-2219 (2005)
H. Koymen, M.N. Senlik, A. Atalar, S. Olcum “Parametric Linear Modeling of Circular cMUT Membranes in Vacuum”, IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control, vol. 54, pp. 1229-1239 (2007)
S. Olcum, A. Kocabas, G. Ertas, A. Atalar, A. Aydinli “Tunable surface plasmon resonance on an elastomeric substrate”, Optics Express, vol. 17, pp.8542-8547 (2009)